Burnham Independence IN10 User Manual download pdf (Page 55)

Table 7: Ignition Module Terminal Cross-Reference

Ignition Module

Terminal Designation

Wiring Ladder Diagram

Terminal Number

MV 1

MV/PV 2

PV 3

GND 4

24V (GND) 5

24V 6

SPARK 9

Figure 52: LED Locations

Yellow LED

Flash Code

Indicates

Recommended

Service Action

Heartbeat Normal Flame Signal N/A

Weak Flame Signal -

System will operate reliably but ame signal is

less than desired.

Note: This indication may ash temporarily

during or shortly after lightoff on some

applications.

Perform routine

maintenance to

assure optimum

ame signal.

Marginal Flame Signal (less than 1.1 µA) -

System may not operate reliably over time.

Service call recommended.

Note: This indication may ash temporarily

during or shortly after lightoff on some

applications.

Check gas supply,

pilot burner, ame

sense wiring,

contamination of

ame rod, burner

ground connection.

OFF

No Flame or Flame Signal -

below minimum threshold for system operation.

N/A

Flash Code Descriptions

- Heartbeat: Constant ½ second bright, ½ second dim cycles.

- The ash code number signies that the LED ashes X times at 2Hz, remains

off for two seconds, and then repeats sequence.

TABLE 8: Yellow LED Flame Codes

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 91 92

Comments to this Manuals

No comments

Burnham Independence IN10 User Manual Page 55

Comments to this Manuals

Related products and manuals for Fireplaces Burnham Independence IN10