Burnham V8 Series User Manual download pdf (Page 63)

Figure 24: Single Pipe Oil Line

SECTION IX: OIL PIPING

A. GENERAL

1. Use ﬂ exible oil line(s) so the burner swing door

can be opened without disconnecting the oil supply

piping.

2. A supply line fuel oil ﬁ lter is recommended as a

minimum for all ﬁ ring rates but a pleated paper fuel

oil ﬁ lter is recommended for the ﬁ ring rates below

1.0 gph to prevent nozzle fouling.

3. Use Flared ﬁ ttings only.

ECITON

.sgnittifnoisserpmocesutonoD

rothgitriayletulosbaebtsumgnipipliO

.tluseryamemirpfossolroskael

.yletelpmoctinuleufdnaenildeelB

4. Use of a high efﬁ ciency micron ﬁ lter (Garber or

equivalent) in addition to a conventional ﬁ lter is

highly recommended.

B. SINGLE PIPE OIL LINES

1. Standard burners are provided with single-stage

3450 rpm fuel units with the bypass plug removed

for single-pipe installations.

2. The single-stage fuel unit may be installed single-

pipe with gravity feed or lift. Maximum allowable

lift is 8 feet. See Figure 24.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 99 100

No comments

Burnham V8 Series User Manual Page 63