20
FIG. 19
INSTALLATION OF JACKET END PANELS
FIG. 20
VESTIBULE ATTACHMENT DIAGRAM
AttachHexCouplingstoendof
CarriageBoltswhichsecureue
cover plates.
NOTE: Select Carriage Bolts which
line up with holes in the Vestibule
Panel.
18. SECURE VESTIBULE PANEL TO
HEX COUPLINGSusing¼”-20x
3/8” slotted pan head machine screws.
19. ATTACH REAR TOP JACKET
PANEL TO UPPER END PANELS
using #8 SMS. Refer to Fig. 21.
20. INSTALLATION OF CANOPY-
DRAFT HOOD5006Bthru5010B
Section Boilers, see Fig. 22. Place
Cerafelt strips on top of section
assemblynexttoledgesformedby
centersectionsandnexttoledgeon
end sections. Overlap at corners.
21. SECURE CANOPY-DRAFT HOOD
with5/16”-18x5/8”MSdriveninto
the tapped lugs provided for this
purpose on top of the sections. Two
screws are required at each end.
Refer to Fig. 23.
SECTION III – INSTALLATION INSTRUCTIONS (continued)
Comments to this Manuals